Intergrain 4L Charcoal UltraDeck Timber Decking Stain

Intergrain 4L Charcoal UltraDeck Timber Decking Stain

Vendor Builders Mitre 10

Experience the transformative power of

Intergrain UltraDeck Timber Stain

, a long-lasting, semi-transparent, water-based stain that offers exceptional durability for exterior timber. This fast-drying, low-odour finish not only enhances the colour of treated pine and revives faded timber but also protects against the damaging effects of weathering and ageing. Ideal for a variety of applications,

UltraDeck Timber Stain

can be overcoated with

Intergrain UltraClear Exterior

for a gloss, satin, or matt finish on doors and window trims. Suitable for decking, cladding, doors, window frames, screening, fences, garage doors, walkways, and weatherboards, this versatile stain is your go-to solution for all exterior timber needs.

Proper preparation is key to achieving the best results with

Intergrain UltraDeck Timber Stain

. For maintenance coats, clean the surface with

Intergrain UltraPrep™ Timber Cleaner

if the existing coating is in good condition. New timber should be treated with

Intergrain UltraPrep Tannin & Oil Remover

and then cleaned with

Intergrain UltraPrep Timber Cleaner

. For new feature timber like doors and windows, sand to a uniform, smooth surface and ensure it is free from dirt, dust, wax, and oils. For grey and weathered timber with no previous coating, clean with

Intergrain UltraPrep Timber Cleaner

and sand back to a fresh surface if severely weathered. For existing coatings in poor condition, remove the coating using a combination of

Intergrain UltraPrep Tannin & Oil Remover

and power washing, followed by cleaning with

Intergrain UltraPrep Timber Cleaner

. If mould is present, use

Intergrain UltraPrep Mould Killer

as the first step.

Application

Remove excess water and allow the timber to dry for at least 1 hour before coating. Stir

Intergrain UltraDeck Timber Stain

thoroughly before and during use.

Test in a small area to ensure satisfaction with the colour and finish. Apply 2-3 coats for the best indication of the final colour.

Apply using the

Intergrain DeckBrush

(recommended), flat deck applicator, paintbrush, or spray. Do not use a roller. Apply at a coverage rate of 6-12m²/L.

For maintenance, conduct a routine 12-month inspection. Colour fade is the first sign that recoating is needed. Best protection and ease of maintenance are ensured if

Intergrain UltraDeck Timber Stain

is recoated before the deterioration of the coating and timber underneath occurs. To refresh timber with significant signs of weathering, greying, or mould, prepare the surface as per the directions under preparation.

$172.38
Delivery Options
2hrs. Delivery Within 2 Hrs.
3hrs. Delivery Within 3 Hrs.
4hrs. Delivery Within 4 Hrs.
6hrs. Delivery Within 6 Hrs.

Description

Experience the transformative power of

Intergrain UltraDeck Timber Stain

, a long-lasting, semi-transparent, water-based stain that offers exceptional durability for exterior timber. This fast-drying, low-odour finish not only enhances the colour of treated pine and revives faded timber but also protects against the damaging effects of weathering and ageing. Ideal for a variety of applications,

UltraDeck Timber Stain

can be overcoated with

Intergrain UltraClear Exterior

for a gloss, satin, or matt finish on doors and window trims. Suitable for decking, cladding, doors, window frames, screening, fences, garage doors, walkways, and weatherboards, this versatile stain is your go-to solution for all exterior timber needs.

Proper preparation is key to achieving the best results with

Intergrain UltraDeck Timber Stain

. For maintenance coats, clean the surface with

Intergrain UltraPrep™ Timber Cleaner

if the existing coating is in good condition. New timber should be treated with

Intergrain UltraPrep Tannin & Oil Remover

and then cleaned with

Intergrain UltraPrep Timber Cleaner

. For new feature timber like doors and windows, sand to a uniform, smooth surface and ensure it is free from dirt, dust, wax, and oils. For grey and weathered timber with no previous coating, clean with

Intergrain UltraPrep Timber Cleaner

and sand back to a fresh surface if severely weathered. For existing coatings in poor condition, remove the coating using a combination of

Intergrain UltraPrep Tannin & Oil Remover

and power washing, followed by cleaning with

Intergrain UltraPrep Timber Cleaner

. If mould is present, use

Intergrain UltraPrep Mould Killer

as the first step.

Application

Remove excess water and allow the timber to dry for at least 1 hour before coating. Stir

Intergrain UltraDeck Timber Stain

thoroughly before and during use.

Test in a small area to ensure satisfaction with the colour and finish. Apply 2-3 coats for the best indication of the final colour.

Apply using the

Intergrain DeckBrush

(recommended), flat deck applicator, paintbrush, or spray. Do not use a roller. Apply at a coverage rate of 6-12m²/L.

For maintenance, conduct a routine 12-month inspection. Colour fade is the first sign that recoating is needed. Best protection and ease of maintenance are ensured if

Intergrain UltraDeck Timber Stain

is recoated before the deterioration of the coating and timber underneath occurs. To refresh timber with significant signs of weathering, greying, or mould, prepare the surface as per the directions under preparation.

You may also like