Description
Cabot’s Stain And Varnish Water Based
is a versatile product designed for all interior timber. This low-odour, scratch-resistant stain is user-friendly and provides a durable finish that enhances the natural grain of the wood. With no top coat required, it offers a fast 2-hour recoat time and resists stains and scratches effectively.
PREPARATION
Note: Fill nail holes, cracks, and other defects with
Cabot’s Wood Tone Putty
after applying the first coat of this product for accurate colour matching. Remove stains, dirt, wax, grease, and oil with mineral turpentine. Remove any polish with a suitable floor polish remover.
Bare Timber
Sand the surface smooth using 180 – 240 grit sandpaper. Sand only in the direction of the grain. Remove all traces of sanding dust.
Previously Coated Timber
Completely remove the previous coating using a paint stripper or by sanding. Remove all traces of sanding dust.
APPLICATION
1. Stir thoroughly with a broad flat paddle until pigment is mixed in and colour is uniform. Keep well stirred during use. If using more than one can, mix all cans together into a larger container to ensure colour uniformity.2. Apply with a good quality brush or roller.3. Apply three coats depending on the required depth of colour, allowing 2 hours between coats.4. For best results, sand between coats using 240 grit sandpaper.
COLOUR STRENGTH
If the desired colour is achieved after 1 or 2 coats of
Cabot’s Stain & Varnish Water Based
, use
Cabot’s Cabothane Clear Water Based
to complete the 3 coat system.
MAINTENANCE
Regular inspection of all coated surfaces is recommended. Re-coating is recommended when the coating looks dull or tired.1. Clean with
Cabot’s Floor Clean
following label instructions.2. Sand with 240 grit sandpaper, remove all traces of sanding dust.3. Apply 1-2 coats of
Stain & Varnish Water Based
.
Features
Durable finish – no top coat required
Enhances the natural wood grain of timber
Fast 2-hour recoat time




2hrs.