Cabot's 250ml Jarrah Oil Based Interior Stain

Cabot’s 250ml Jarrah Oil Based Interior Stain

Vendor Builders Mitre 10

Cabot’s Interior Stain Oil Based

is a penetrating stain designed for interior doors, windows, trim, and furniture. This oil-enriched formula rejuvenates and transforms interior timber, while enhancing the natural grain. Available in a variety of naturally beautiful wood stain colors, it ensures a stunning finish for your woodwork projects.

PREPARATION

Note: Fill nail holes, cracks, and other defects with

Cabot’s WoodTone Putty

after applying the first coat of this product for accurate color matching. Remove stains, dirt, wax, grease, and oil with mineral turpentine. Remove any polish with a suitable floor polish remover.

Bare Timber

Sand the surface smooth using 180 – 240 grit sandpaper. Sand only in the direction of the grain. Remove all traces of sanding dust.

Previously Coated Timber

Completely remove the previous coating using a paint stripper or by sanding. Remove all traces of sanding dust.

IMPORTANT

The natural color of the timber will affect the finished color of the stain. The clear coating used to seal the stain may also have some effect on the final color. Always test the stain on an off-cut or concealed part of the actual job before proceeding.

Staining a Floor

For the best method of staining a floor, please refer to the

Cabot’s Stain & Varnish

range.

APPLICATION

Apply with a brush, rag, or roller.

1. Stir thoroughly with a broad flat paddle until pigment is mixed in and color is uniform. Keep well stirred during use. If using more than one can, mix all cans together into a larger container to ensure color uniformity.

2. Apply with a good quality brush, roller, or lint-free rag and work the stain evenly into the grain.

3. Allow to set for 2-10 minutes then rub with a clean soft cloth using a circular motion to remove any excess stain and produce an even-colored surface. The intensity of the color will depend on the porosity of the timber and the length of time before the stain is wiped off.

4. Allow 8 hours drying time.

5. Apply

Cabot’s Cabothane Clear Oil Based

or

Cabot’s Danish Oil

as a top coat following label instructions.

MAINTENANCE

Regular inspection of all coated surfaces is recommended.

Once water repellency has diminished, re-apply the existing topcoat as per label instructions.

If the timber needs re-staining, sand back to bare.

Features

Enhances timber grain

Easy to apply

Oil enriched

Clear top coat required

$25.50
Delivery Options
2hrs. Delivery Within 2 Hrs.
3hrs. Delivery Within 3 Hrs.
4hrs. Delivery Within 4 Hrs.
6hrs. Delivery Within 6 Hrs.

Description

Cabot’s Interior Stain Oil Based

is a penetrating stain designed for interior doors, windows, trim, and furniture. This oil-enriched formula rejuvenates and transforms interior timber, while enhancing the natural grain. Available in a variety of naturally beautiful wood stain colors, it ensures a stunning finish for your woodwork projects.

PREPARATION

Note: Fill nail holes, cracks, and other defects with

Cabot’s WoodTone Putty

after applying the first coat of this product for accurate color matching. Remove stains, dirt, wax, grease, and oil with mineral turpentine. Remove any polish with a suitable floor polish remover.

Bare Timber

Sand the surface smooth using 180 – 240 grit sandpaper. Sand only in the direction of the grain. Remove all traces of sanding dust.

Previously Coated Timber

Completely remove the previous coating using a paint stripper or by sanding. Remove all traces of sanding dust.

IMPORTANT

The natural color of the timber will affect the finished color of the stain. The clear coating used to seal the stain may also have some effect on the final color. Always test the stain on an off-cut or concealed part of the actual job before proceeding.

Staining a Floor

For the best method of staining a floor, please refer to the

Cabot’s Stain & Varnish

range.

APPLICATION

Apply with a brush, rag, or roller.

1. Stir thoroughly with a broad flat paddle until pigment is mixed in and color is uniform. Keep well stirred during use. If using more than one can, mix all cans together into a larger container to ensure color uniformity.

2. Apply with a good quality brush, roller, or lint-free rag and work the stain evenly into the grain.

3. Allow to set for 2-10 minutes then rub with a clean soft cloth using a circular motion to remove any excess stain and produce an even-colored surface. The intensity of the color will depend on the porosity of the timber and the length of time before the stain is wiped off.

4. Allow 8 hours drying time.

5. Apply

Cabot’s Cabothane Clear Oil Based

or

Cabot’s Danish Oil

as a top coat following label instructions.

MAINTENANCE

Regular inspection of all coated surfaces is recommended.

Once water repellency has diminished, re-apply the existing topcoat as per label instructions.

If the timber needs re-staining, sand back to bare.

Features

Enhances timber grain

Easy to apply

Oil enriched

Clear top coat required

You may also like