Cabot's 1L Tint Base Water Based Interior Stain

Cabot’s 1L Tint Base Water Based Interior Stain

Vendor Builders Mitre 10

Transform the color of your interior timber with a penetrating stain designed for doors, windows, trim, and furniture. This product is easy to use and enhances the natural grain of the wood.

PREPARATION

Note: Fill nail holes, cracks, and other defects with

Cabot’s Wood Tone Putty

after applying the first coat of this product for accurate color matching. Remove stains, dirt, wax, grease, and oil with mineral turpentine. Remove any polish with a suitable floor polish remover.

Bare Timber

Sand the surface smooth using 180 – 240 grit sandpaper. Sand only in the direction of the grain. Remove all traces of sanding dust.

Previously Coated Timber

Completely remove the previous coating using a paint stripper or by sanding. Remove all traces of sanding dust.

IMPORTANT

The natural color of the timber will affect the finished color of the stain. The clear coating used to seal the stain may also have some effect on the final color. Always test the stain on an off-cut or concealed part of the actual job before proceeding.

Staining a Floor

For the best method of staining a floor, please refer to the

Cabot’s Stain & Varnish

range.

APPLICATION

Apply with a brush, rag, or roller.

1. Stir thoroughly with a broad flat paddle until the pigment is mixed in and the color is uniform. Keep well stirred during use. If using more than one can, mix all cans together in a larger container to ensure color uniformity.

2. Apply with a good quality brush, roller, or lint-free rag and work the stain evenly into the grain.

3. Allow to set for 1 – 5 minutes then rub with a clean soft cloth using a circular motion to remove any excess stain and produce an even-colored surface. The intensity of the color will depend on the porosity of the timber and the length of time before the stain is wiped off.

4. Allow 2 hours of drying time.

5. Apply

Cabot’s Cabothane Clear Water Based

as a top coat following label instructions.

MAINTENANCE

Regular inspection of all coated surfaces is recommended. Once water repellency has diminished, re-apply the existing topcoat as per label instructions. If the timber needs re-staining, sand back to bare.

Features

Easy to apply

Low odor

Enhances timber grain

Fast recoat

$67.50
Delivery Options
2hrs. Delivery Within 2 Hrs.
3hrs. Delivery Within 3 Hrs.
4hrs. Delivery Within 4 Hrs.
6hrs. Delivery Within 6 Hrs.

Description

Transform the color of your interior timber with a penetrating stain designed for doors, windows, trim, and furniture. This product is easy to use and enhances the natural grain of the wood.

PREPARATION

Note: Fill nail holes, cracks, and other defects with

Cabot’s Wood Tone Putty

after applying the first coat of this product for accurate color matching. Remove stains, dirt, wax, grease, and oil with mineral turpentine. Remove any polish with a suitable floor polish remover.

Bare Timber

Sand the surface smooth using 180 – 240 grit sandpaper. Sand only in the direction of the grain. Remove all traces of sanding dust.

Previously Coated Timber

Completely remove the previous coating using a paint stripper or by sanding. Remove all traces of sanding dust.

IMPORTANT

The natural color of the timber will affect the finished color of the stain. The clear coating used to seal the stain may also have some effect on the final color. Always test the stain on an off-cut or concealed part of the actual job before proceeding.

Staining a Floor

For the best method of staining a floor, please refer to the

Cabot’s Stain & Varnish

range.

APPLICATION

Apply with a brush, rag, or roller.

1. Stir thoroughly with a broad flat paddle until the pigment is mixed in and the color is uniform. Keep well stirred during use. If using more than one can, mix all cans together in a larger container to ensure color uniformity.

2. Apply with a good quality brush, roller, or lint-free rag and work the stain evenly into the grain.

3. Allow to set for 1 – 5 minutes then rub with a clean soft cloth using a circular motion to remove any excess stain and produce an even-colored surface. The intensity of the color will depend on the porosity of the timber and the length of time before the stain is wiped off.

4. Allow 2 hours of drying time.

5. Apply

Cabot’s Cabothane Clear Water Based

as a top coat following label instructions.

MAINTENANCE

Regular inspection of all coated surfaces is recommended. Once water repellency has diminished, re-apply the existing topcoat as per label instructions. If the timber needs re-staining, sand back to bare.

Features

Easy to apply

Low odor

Enhances timber grain

Fast recoat

You may also like