2hrs.
Description
Enhance the longevity and appearance of your deck with
Cabot’s Natural Decking Oil
, a fast-drying, deep-penetrating oil designed to nourish and protect exposed timbers. With a quick re-coat time of just 6 hours,
Cabot’s Natural Decking Oil
allows you to apply two coats in a single day, giving you more time to enjoy your weekend with family and friends. This traditional decking oil is perfect for use on decks, garden furniture, pergolas, fences, and gates.
Preparation
New Bare Timber
To coat new bare timber immediately, scrub damp timber with
Cabot’s New Timber Prep
, following label instructions. New Timber Prep will draw out tannins and oils quickly from the surface, allowing you to skip the 4-6 weeks weathering process required for new timber. Always follow New Timber Prep with
Cabot’s Deck Clean
following label instructions. Remove excess water from the surface with a squeegee on
Cabot’s Deck Prep brush
, and allow timber to dry for at least 1 hour. Note: Cooler conditions could slow down the drying time of the timber.
Previously Painted or Varnished Timber
Remove back to bare timber using a paint stripper or sanding. For exterior surfaces, clean with
Cabot’s Deck Clean
following label instructions.
Previously Stained and Oiled Timber
For exterior surfaces, clean with
Cabot’s Deck Clean
following label instructions. Test if the surface is ready for coating by sprinkling water on the timber. If the water ‘beads’ on the surface, further weathering, sanding, or use of a timber stripper is required before applying
Cabot’s Natural Decking Oil
. If the water soaks into the surface, you are ready to apply.
Weathered and Grey Timber
Sand timber back to fresh timber. Clean with
Cabot’s Deck Clean
following label instructions. Note: Fill holes and imperfections with a suitable timber putty after applying the first coat.
Application
Apply with Brush, Decking Applicator
1. Stir thoroughly with a broad flat paddle before and during use.
2. Apply liberally along the length of the board including exposed edges and end grain by brush or pad applicator.
3. Apply two coats allowing 6 hours between coats.
Maintenance
Every 12 months, check your coated timber for changes in color or water repellency diminishes due to weathering. When required,
1. Clean the surfaces with Deck Clean as per label instructions.
2. Recoat with 2 coats of Natural Decking Oil.
Use
Cabot’s Everyday Deck Wash
to refresh exterior timber decking and help remove dirt, dust, and bird droppings for everyday use.
Features
Deep penetrating, natural decking oil
Protects timbers against dirt and mould
UV resistant and water repellent
