2hrs.
Description
Revitalize and restore your timber with
Cabot’s Deck Clean
. This exceptional product is designed to rejuvenate both new and old timber, effectively preparing it for coating by removing dirt, oils, grease, and other contaminants. Ideal for exterior use on decking, pergolas, weatherboards, and exposed outdoor timber,
Cabot’s Deck Clean
ensures your timber surfaces are clean and ready for a fresh coat.
For optimal results, wear protective gloves and goggles when using this product. Begin by removing excessive dirt and oil contamination with hot soapy water and a stiff broom or brush. Rinse the area clean with water. Protect plants, bushes, metal, and paintwork that are not to be cleaned with plastic sheets, and rinse off immediately and thoroughly if contact occurs.
Application Instructions:
Shake contents before use.
Hose down the timber surface, ensuring it is damp prior to any application of
Cabot’s Deck Clean
.
Test on a small area to determine effectiveness and strength required.
Add one part
Cabot’s Deck Clean
to four parts water in a
Cabot’s Deck Hand
bucket and mix well. For stubborn stains, use a stronger solution.
Apply generously to the timber with a brush or broom. Scrub vigorously.
Leave the solution on the timber for 10-20 minutes.
Rinse off the surface with water using a high-pressure or garden hose. Avoid allowing it to dry out. Severely stained decks may need an additional treatment, more vigorous scrubbing, or a power washer.
Important: In hot temperatures, do not apply in direct sunlight. Cool the timber by lightly dampening with water and coat in the shade. Note that
Cabot’s Deck Clean
is not a paint remover, but it may remove some old and weathered coatings from timber. Enjoy the easy hose-on application for a hassle-free cleaning experience.
Features
Rejuvenates and restores timber
Prepares timber for coating
Washes up in water
