2hrs.
Description
Cabot’s Exterior Clear
is a durable, marine-grade polyurethane that provides protection and shine without hiding the grain. It offers resistance against weathering and moisture damage and incorporates the latest ultra-violet absorber technology to maximize gloss, performance, and durability.
PREPARATION
Note: Fill holes and imperfections with a suitable timber putty.
New Bare Timber
To coat new bare timber immediately, scrub damp timber with
Cabot’s New Timber Prep
, following label instructions. New Timber Prep will draw out tannins and oils quickly from the surface, allowing you to skip the 4-6 weeks weathering process required for new timber. Always follow New Timber Prep with
Cabot’s Deck Clean
following label instructions. Remove excess water from the surface with a squeegee on
Cabot’s Deck Prep brush
, and allow timber to dry for at least 1 hour. Note: Cooler conditions could slow down the drying time of the timber.
Previously Painted or Varnished Timber
Remove back to bare timber using a paint stripper or sanding. For exterior surfaces, clean with
Cabot’s Deck Clean
following label instructions.
Previously Stained and Oiled Timber
For exterior surfaces, clean with
Cabot’s Deck Clean
following label instructions. Test if the surface is ready for coating by sprinkling water on the timber. If the water beads on the surface, repeat the application of
Cabot’s Deck Clean
. If water is absorbed into timber, it is ready for coating. For a more transparent look, sand timber back to bare before coating.
Weathered and Grey Timber
For best results, sand timber back to fresh substrate. Clean with
Cabot’s Deck Clean
following label instructions.
APPLICATION
Apply with a brush or spray applicator.
1. Stir thoroughly with a broad flat paddle before and during use.
2. Always brush in the direction of the grain. Apply 3 liberal coats, allowing 12 hours between coats.
3. Sand lightly between coats.
MAINTENANCE
Regular inspection of all coated surfaces is recommended. Pay particular attention to sharp edges.
1. Clean the surface with
Cabot’s Deck Clean
.
2. Apply
Cabot’s Exterior Clear
following label instructions.
Features
Provides marine-grade protection and shine.
Resistant to weathering and moisture damage.
Incorporates advanced UV absorber technology.
